Curtainsider & Tarpaulin
Available in 8 model variants — with full technical sheets
8 Models
Curtain Side Products
Also Known As
T.SCC M / 125 - 12 / 27
T.SCC X+ / 125 - 12 / 27
T.SCD M / 90 - 12 / 27
T.SCD X+ / 90 - 12 / 27
T.SCL M / 150 - 12 / 27
T.SCL X+ / 150 - 12 / 27
T.SCS NG M / 90 - 12 / 27
T.SCS NG X+ / 90 - 12 / 27
Technical Specifications
- Fifth wheel height (H5)
- 1.150 mm
- Gooseneck (NH)
- 150 mm
- Wheelbase (Wb)
- 7.700 mm
- Net interior height (IH)
- 2.690 mm
- Exterior length (L)
- 13.680 mm
- Interior length (Il)
- 13.610 mm
- Vehicle width (W)
- 2.550 mm
- Interior width (IW)
- 2.480 mm
- Tare weight ±3%
- 6.480 kg
Technical capacity
- King pin capacity
- 12 ton technical king pin carrying capacity
- Axle load
- 27.000 kg
- Gross weight
- 39.000 kg
- Pallet capacity
- Carrying capacity of 34 Euro pallets
Technical information
- Chassis
- Compliant with the ISO 1726 standard, reinforced with Barlas-applied KTL technology (cataphoretic coating using the zinc-phosphate tri-electron method); manufactured from high-quality, high-strength S700 MC steel. Consists of two I-section longitudinal members connected by the main cross member and the king pin cross member.
- Braking system
- Dual-circuit electro-pneumatic EBS 2S/2M braking system compliant with UN ECE R13, incorporating anti-lock (ABS) and roll stability support (RSS) and a voltage supply (24V) through the brake lamp.
- Tyre size
- 385/65 R 22.5
- Axles
- BPW disc-braked axles, each with a technical capacity of 9 tons.
- Electrical system
- 24 V Aspöck lighting system with 2x7 and 1x15 pin sockets, compliant with UN ECE R48 and ADR regulations. Aspöck Europoint III bulb-type lighting system with LED front position lamps and side position lamps and rear stop lamps.
- Floor
- 28 mm phenolic resin-coated plywood floor compliant with EN 283 standards, rated for a 5,460 kg forklift axle load.
- K-Fix
- Load securing points at 70 mm intervals on both sides of the side rave, 118 per side and 236 in total. Each lashing point provides a 2,5 ton capacity and is compatible with all types of lashing straps.
- Front panel type
- Reinforced aluminium full front panel with an internal protection plate
- Roof type
- Edscha single-side sliding roof system, openable from the rear
- Fifth-Wheel Height (H5)
- 950 mm
- Gooseneck (NH)
- 150 mm
- Wheelbase (Wb)
- 7,700 mm
- Internal Clear Height (IH)
- 2,900 mm
- Overall Length (L)
- 13,680 mm
- Internal Length (Il)
- 13,610 mm
- Vehicle Width (W)
- 2,550 mm
- Internal Width (IW)
- 2,480 mm
- Tare Weight ±3%
- 6,350 kg
Technical Capacity
- King Pin Capacity
- 12 tonne technical king pin carrying capacity
- Axle Load
- 27,000 kg
- Total Weight
- 39,000 kg
- Pallet Capacity
- carrying capacity of 34 Euro pallets
Technical Information
- Chassis
- Compliant with the ISO 1726 standard, reinforced with Barlas expertise using KTL (cataphoretic coating carried out by the zinc-phosphate tri-electron method) technology; manufactured from high-quality, high-strength S700 MC steel. It consists of two I-section side members and is connected to the main cross-member and the king pin cross-member.
- Braking System
- A dual-circuit electro-pneumatic EBS 2S/2M braking system is fitted, compliant with the UN ECE R13 regulation, incorporating anti-lock (ABS) and roll stability control (RSS), with voltage supply (24V) via the brake lamp.
- Tyre Size
- 445/45 R 19.5
- Axles
- BPW brand disc-braked axles, each with a technical capacity of 9 tonnes, are used.
- Electrical System
- A 24 V Aspöck brand lighting system with 2x7 and 1x15 pin sockets, compliant with the UN ECE R48 regulation and ADR legislation, is fitted. It is an Aspöck Europoint III bulb-type lighting system with LED front position lamps and side position lamps and rear stop lamps.
- Floor Decking
- A 28 mm thick phenolic-resin-coated plywood floor, compliant with EN 283 standards and resistant to a forklift axle load of 5,460 kg, is provided.
- K-Fix
- It has 118 lashing points on each side at 70 mm intervals along the side rave rail, 236 in total. Each lashing point provides 2.5 tonne capacity and is compatible with every type of lashing strap.
- Front Panel Type
- Reinforced full aluminium front panel with an internal protection plate
- Roof Type
- Edscha brand, rear-opening, single-sided sliding roof system
3. Mega
- Fifth-Wheel Height (H5)
- 950 mm
- Gooseneck (NH)
- 90 mm
- Wheelbase (Wb)
- 7,700 mm
- Internal Clear Height (IH)
- 2,950 mm
- Overall Length (L)
- 13,680 mm
- Internal Length (Il)
- 13,610 mm
- Vehicle Width (W)
- 2,550 mm
- Internal Width (IW)
- 2,474 mm
Technical Capacity
- King Pin Capacity
- 12,000 kg
- Axle Load
- 27,000 kg
- Total Weight
- 39,000 kg
- Pallet Capacity
- It has a carrying capacity of 34 Euro pallets.
Technical Information
- Chassis
- Compliant with the ISO 1726 standard, manufactured from high-quality, high-strength S700 MC steel.
- Braking System
- A dual-circuit electro-pneumatic EBS 2S/2M braking system is fitted, compliant with the UN ECE R13 regulation, incorporating anti-lock (ABS) and roll stability control (RSS), with voltage supply (24V) via the brake lamp.
- Tyre Size
- 445/45 R19.5
- Axles
- 3 BPW brand disc-braked axles, each with a technical capacity of 9 tonnes, are used.
- Electrical System
- Aspöck Europoint III
- Floor Decking
- A 30 mm thick phenolic-resin-coated plywood floor, compliant with EN 283 standards, resistant to a forklift axle load of 7,200 kg and reinforced with omega profiles, is provided.
- K-Fix
- It has lashing points on each side at 70 mm intervals along the side rave rail. Each lashing point provides 2.5 tonne capacity and is compatible with every type of lashing strap.
- Front Panel Type
- Full Aluminium Front Panel
- Roof Type
- Edscha brand, rear-opening, single-sided sliding roof system
4. Maxima Plus
- Fifth-Wheel Height (H5)
- 1,150 mm
- Gooseneck (NH)
- 90 mm
- Wheelbase (Wb)
- 7,700 mm
- Internal Clear Height (IH)
- 2,750 mm
- Overall Length (L)
- 13,680 mm
- Internal Length (Il)
- 13,610 mm
- Vehicle Width (W)
- 2,550 mm
- Internal Width (IW)
- 2,474 mm
- Tare Weight ±3%
- 6,960 kg
Technical Capacity
- King Pin Capacity
- 12,000 kg
- Axle Load
- 27,000 kg
- Total Weight
- 39,000 kg
- Pallet Capacity
- It has a carrying capacity of 34 Euro pallets.
Technical Information
- Chassis
- Compliant with the ISO 1726 standard, manufactured from high-quality, high-strength S700 MC steel.
- Braking System
- A dual-circuit electro-pneumatic EBS 2S/2M braking system is fitted, compliant with the UN ECE R13 regulation, incorporating anti-lock (ABS) and roll stability control (RSS), with voltage supply (24V) via the brake lamp.
- Tyre Size
- 385/65 R22.5
- Axles
- 3 BPW brand disc-braked axles, each with a technical capacity of 9 tonnes, are used.
- Electrical System
- Aspöck Europoint III
- Floor Decking
- A 30 mm thick phenolic-resin-coated plywood floor, compliant with EN 283 standards, resistant to a forklift axle load of 7,200 kg and reinforced with omega profiles, is provided.
- K-Fix
- It has lashing points on each side at 70 mm intervals along the side rave rail. Each lashing point provides 2.5 tonne capacity and is compatible with every type of lashing strap.
- Front Panel Type
- A KTL-coated steel full front panel and a 1,220 mm plywood protection board are provided.
- Roof Type
- Edscha brand, rear-opening, single-sided sliding roof system
5. Double Deck
- Fifth-Wheel Height (H5)
- 950 mm
- Gooseneck (NH)
- 90 mm
- Wheelbase (Wb)
- 7,700 mm
- Internal Clear Height (IH)
- 2,950 mm
- Overall Length (L)
- 13,680 mm
- Internal Length (Il)
- 13,610 mm
- Vehicle Width (W)
- 2,550 mm
- Internal Width (IW)
- 2,480 mm
- Tare Weight ±3%
- 7,680 kg
Technical Capacity
- King Pin Capacity
- 12,000 kg
- Axle Load
- 27,000 kg
- Total Weight
- 39,000 kg
- Pallet Capacity
- carrying capacity of 67 Euro pallets
Technical Information
- Chassis
- Compliant with the ISO 1726 standard, reinforced with Barlas expertise using KTL (cataphoretic coating carried out by the zinc-phosphate tri-electron method) technology; manufactured from high-quality, high-strength S460 MC steel. It consists of two I-section side members and is connected to the main cross-member and the king pin cross-member.
- Braking System
- A dual-circuit electro-pneumatic EBS 2S/2M braking system is fitted, compliant with the UN ECE R13 regulation, incorporating anti-lock (ABS) and roll stability control (RSS), with voltage supply (24V) via the brake lamp.
- Tyre Size
- 445/45 R19.5
- Axles
- 3 BPW brand disc-braked axles, each with a technical capacity of 9 tonnes, are used.
- Electrical System
- A 24 V Aspöck brand lighting system with 2x7 and 1x15 pin sockets, compliant with the UN ECE R48 regulation and ADR legislation, is fitted. It is an Aspöck Europoint III bulb-type lighting system with LED front position lamps and side position lamps and rear stop lamps.
- Floor Decking
- A 30 mm thick phenolic-resin-coated plywood floor, compliant with EN 283 standards, resistant to a forklift axle load of 7,200 kg and reinforced with omega profiles, is provided.
- K-Fix
- It has lashing points on each side at 70 mm intervals along the side rave rail. Each lashing point provides 2.5 tonne capacity and is compatible with every type of lashing strap.
- Front Panel Type
- A KTL-coated steel full front panel and a 1,220 mm plywood protection board are provided.
- Roof Type
- Edscha brand, rear-opening, single-sided sliding roof system
- Double-Deck Stowage Locker
- 1 PVC-coated steel tool locker of 2,400 mm width is provided.
- Number of Load-Bearing Beams
- 24 units
- Fifth Wheel Height (H5)
- 1.100 mm
- Gooseneck (NH)
- 90 mm
- Wheelbase (Wb)
- 7.700 mm
- Internal Clear Height (IH)
- 2.800 mm
- External Length (L)
- 13.680 mm
- Internal Length (Il)
- 13.610 mm
- Vehicle Width (W)
- 2.550 mm
- Internal Width (IW)
- 2.480 mm
- Tare Weight ±3%
- 7.720 kg
Technical Capacity
- King Pin Capacity
- 12.000 kg
- Axle Load
- 27.000 kg
- Gross Weight
- 39.000 kg
- Pallet Capacity
- carrying capacity of 67 Euro pallets
Technical Information
- Chassis
- Compliant with the ISO 1726 standard, reinforced with Barlas expertise using KTL (cataphoretic coating carried out by the zinc-phosphate tri-electron method) technology; manufactured from high-quality, high-strength S460 MC steel. It consists of two I-section longitudinal beams and is connected by the main crossmember and the king pin crossmember.
- Braking System
- A dual-circuit electro-pneumatic EBS 2S/2M braking system is fitted, compliant with the UN ECE R13 regulation, featuring anti-lock braking (ABS) and roll stability support (RSS), with voltage supply (24V) provided via the brake light.
- Tyre Size
- 385/65 R22,5
- Axles
- Three BPW brand disc-braked axles are used, each with a technical capacity of 9 tonnes.
- Electrical System
- A 24 V Aspöck brand lighting system with 2x7 and 1x15 pin sockets is fitted, compliant with the UN ECE R48 regulation and ADR legislation. The front position lamps and side position lamps are LED, and the rear stop lamps are an Aspöck Europoint III bulb-type lighting system.
- Floor Decking
- A 30 mm thick phenolic resin-coated plywood floor is provided, compliant with the EN 283 standards, resistant to a 7.200 kg forklift axle load and reinforced with omega profiles.
- K-Fix
- It has load lashing points on both sides of the outer rail at 70 mm intervals. Each load lashing point provides a capacity of 2.5 tonnes and is compatible with every type of tensioning strap.
- Front Panel Type
- A KTL-coated steel full front panel and a 1.220 mm plywood protection sheet are provided.
- Roof Type
- Edscha brand, rear-opening, single-side sliding roof system
- Double-Deck Storage Cabinet
- One PVC-coated steel tool cabinet 2.400 mm wide is provided.
- Number of Load-Bearing Profiles
- 24 pcs
6. Roll
- Fifth Wheel Height (H5)
- 950 mm
- Gooseneck (NH)
- 125 mm
- Wheelbase (Wb)
- 7.700 mm
- Internal Clear Height (IH)
- 2.920 mm
- External Length (L)
- 13.680 mm
- Internal Length (Il)
- 13.610 mm
- Vehicle Width (W)
- 2.550 mm
- Internal Width (IW)
- 2.480 mm
Technical Capacity
- King Pin Capacity
- 12.000 kg
- Axle Load
- 27.000 kg
- Pallet Capacity
- carrying capacity of 34 Euro pallets.
Technical Information
- Chassis
- Compliant with the ISO 1726 standard, reinforced with Barlas expertise using KTL (cataphoretic coating carried out by the zinc-phosphate tri-electron method) technology; manufactured from high-quality, high-strength S460 MC steel. It consists of two I-section longitudinal beams and is connected by the main crossmember and the king pin crossmember.
- Cataphoretic Chassis
- Reinforced with Barlas expertise using KTL (zinc-phosphate tri-electron method) cataphoretic coating technology; with the KTL system providing extra protection against potential rusting and perforation, it offers a 10-YEAR warranty against corrosion and perforation.
- Braking System
- A dual-circuit electro-pneumatic EBS 2S/2M braking system is fitted, compliant with the UN ECE R13 regulation, featuring anti-lock braking (ABS) and roll stability support (RSS), with voltage supply (24V) provided via the brake light.
- Axles
- BPW brand disc-braked axles, each with a technical capacity of 9 tonnes, are used.
- Tyre Size
- 445/45 R19.5
- Electrical System
- A 24 V Aspöck brand lighting system with 2x7 and 1x15 pin sockets is fitted, compliant with the UN ECE R48 regulation and ADR legislation. The front position lamps and side position lamps are LED, and the rear stop lamps are an Aspöck Europoint III bulb-type lighting system.
- Landing Legs
- Mechanical landing legs of Barlas's choice, with a technical carrying capacity of 24 tonnes, are used.
- Fifth Wheel Height (H5)
- 1100 mm
- Gooseneck (NH)
- 125 mm
- Wheelbase (Wb)
- 7.700 mm
- Internal Clear Height (IH)
- 2.750 mm
- External Length (L)
- 13.680 mm
- Internal Length (Il)
- 13.610 mm
- Vehicle Width (W)
- 2.550 mm
- Internal Width (IW)
- 2.480 mm
- Roll Well Length
- Roll carrying well length: 7.250 mm, Roll Diameter: 900 mm - 2.100 mm
- Tare Weight ±3%
- 7.550 kg
Technical Capacity
- King Pin Capacity
- 12.000 kg
- Axle Load
- 27.000 kg
- Gross Weight
- 39.000 kg
- Pallet Capacity
- carrying capacity of 34 Euro pallets.
Technical Information
- Chassis
- Compliant with the ISO 1726 standard, reinforced with Barlas expertise using KTL (cataphoretic coating carried out by the zinc-phosphate tri-electron method) technology; manufactured from high-quality, high-strength S460 MC steel. It consists of two I-section longitudinal beams and is connected by the main crossmember and the king pin crossmember.
- Braking System
- A dual-circuit electro-pneumatic EBS 2S/2M braking system is fitted, compliant with the UN ECE R13 regulation, featuring anti-lock braking (ABS) and roll stability support (RSS), with voltage supply (24V) provided via the brake light.
- Tyre Size
- 385/65 R22.5
- Axles
- BPW brand disc-braked axles, each with a technical capacity of 9 tonnes, are used.
- Electrical System
- A 24 V Aspöck brand lighting system with 2x7 and 1x15 pin sockets is fitted, compliant with the UN ECE R48 regulation and ADR legislation. The front position lamps and side position lamps are LED, and the rear stop lamps are an Aspöck Europoint III bulb-type lighting system.
- Floor Decking
- A 30 mm thick phenolic resin-coated plywood floor is provided, compliant with the EN 283 standards, resistant to a 5.460 kg forklift axle load and reinforced with omega profiles. On the right and left sides of the roll well there are 5 heavy-duty type load lashing rings each, with a capacity of 5 tonnes.
- K-Fix
- It has load lashing points on both sides of the outer rail at 70 mm intervals. Each load lashing point provides a capacity of 2.5 tonnes and is compatible with every type of tensioning strap.
- Front Panel Type
- A KTL-coated steel full front panel and a 1.220 mm plywood protection sheet are provided.
- Roof Type
- Edscha brand, rear-opening, single-side sliding roof system
Let us pick the right vehicle for your project
We will clarify capacity, equipment and options for Curtainsider & Tarpaulin and quote quickly.