Half-Pipe Tipper

Width

max. 2.550 mm

Height

max. 3.020 mm

Axle spacing range

1.300 ~ 1.400 mm *

King-pin height

1.250 ~ 1.350 mm *

Tare weight

6.200 ~ 8500 kg. ± 5%

Loading volume

22 – 24 – 27 – 32 – 40 - 45 m3

Tipper

Products carried

Aggregate and excavation-type materials, all solid-phase bulk loads

Certification

CE certificate in accordance with Machinery Directive 2006/42/EC

• Varies according to the selected product type and optional equipment.

Tipper body

Half-pipe cross-section, high-performance design compatible with loading and unloading conditions,

Wear- and impact-resistant, high-strength imported steel material,

ISO 3834 welded fabrication quality certification is held,

Long-lasting, safe, high-strength, unique body structure obtained by lap-mounting the side wall plates — with an increased number of bends — onto the inner side of the floor plate produced from a single wear-resistant plate, and joining them longitudinally inside and outside with continuous, flawless welding,

Strong, inclined front wall with joints forming an integral whole with the floor and side wall plates, distributing the lifting force of the hydraulic cylinder from its bearing point to the body via support profiles,

Transverse and longitudinal support profiles under the body that reinforce the floor plate,

Durable, inclined, safe, freely opening and closing tailgate, reinforced around its perimeter with support profiles, hinged at the top to the side wall U-supports, with a bottom locking mechanism preventing unintended opening,

Convex, specially designed BARLAS MAXI tailgate with “TPE Utility Model Registration”, increasing the existing carrying volume by a further ~1,5 m3, reducing wear on the inner surface of the tailgate during discharge and providing a wider discharge area (optional),

Hydraulically operated tailgate mechanism that opens and closes automatically and can be controlled from inside the driver's cab (optional),

Fixing tipping shaft bedded on the chassis, joining the body to the chassis.

Hydraulic system

5-stage hydraulic cylinder providing the maximum tipping angle,

Pressure-resistant oil tank with filter and vacuum safety, sized to suit the hydraulic system,

Hydraulic pump coupled to the PTO, delivering high pressure and flow suited to the system,

Directional control valve routing the system's pressure line,

Hydraulic hoses and fittings resistant to high pressure and flow.

Chassis

Full chassis of specially designed, high-strength steel, produced with robotic welding technology, “I” cross-section, reinforced with intermediate cross members, flexible against torsion and bending, providing tipping stability, compatible with the body design,

Mounting brackets on the chassis side member that distribute forces transmitted from road conditions to the running gear and reduce stress,

The parts forming the chassis construction are manufactured in perfect harmony by certified welders using synergic welding machines under ISO 3834 welded fabrication quality certification.

Chassis equipment

King-pin

Component type-approved in accordance with ECE R 55, 2” or 3,5”, removable and refittable from below

Landing legs

Two-speed trailer support legs, each with 25 ton dynamic and 50 ton static load capacity

Axles

Axle set, each axle with 9 ~12 ton capacity, mechanical or air suspension, drum or disc brakes

Rims

14,00 – 11,75 – 9,00 x 22,5

Tyres

425 - 385/65 R 22,5 (single) or 315/80 R 22,5 (twin)

Brake system

EBS/ABS brake system in accordance with ECE R 13

Electrical system

ADR electrical set in accordance with ECE R 105

Bumper

In accordance with ECE R 58

Paint

Painting is carried out with at least 2 coats of epoxy primer,

As the top coat, 2 coats of acrylic paint with “OVEN-CURED PAINT” application,

Thanks to advanced technical equipment, homogeneous distribution over every point of the body and a varnish-gloss surface finish are achieved.

BARLAS reserves the right to make changes to its products. Technical data are approximate values and refer to the standard product version. Dimensions may vary depending on the truck make and model. The above information does not constitute an offer. For further details about the product, please contact us.