Concrete Mixer

Width

max. 2.550 mm

Height

max. 3.020 mm

Axle spacing range

1.300 ~ 1.400 mm *

King-pin height

1.250 mm *

Tare weight

7900 kg. ± 5%

Mixer volume

12 – 14 m3

• Varies according to the selected product type and optional equipment.

Chassis

A special-design full chassis of high-strength steel with an “I” cross-section, matched to the superstructure type, manufactured with robotic welding technology, reinforced with intermediate cross members, flexible against torsion and bending and providing rollover safety,

Connection brackets on the chassis side member that distribute the forces transmitted from road conditions to the running gear, reducing stress,

The parts forming the chassis construction are manufactured in perfect harmony by certified welders using synergic welding machines under ISO 3834 welded-fabrication quality approval.

Chassis equipment

King-pin

component type-approved to ECE R 55, 2”, removable from below

Landing legs

two-speed trailer support legs, each with 25 ton dynamic and 50 ton static load capacity,

Axles

axle set with 9 ton capacity each, air suspension, drum or disc brakes

Rims

11,75 x 22,5

Tyres

385/65 R 22,5

Braking system

EBS braking system compliant with ECE R 13

Electrical system

electrical set compliant with ECE R 105

Bumper

compliant with ECE R 58

Paint

Painting is carried out with at least 2 coats of epoxy primer,

As the final coat, 2 coats of acrylic paint with “OVEN-CURED PAINT” application,

Advanced technical equipment achieves a homogeneous distribution and a lacquer-gloss surface finish at every point of the body.

BARLAS reserves the right to modify its products. The technical information given is approximate and based on the standard product configuration. Dimensions may vary depending on the make and model of the truck. The information above does not constitute an offer. For further product details, please contact us.

LIVESTOCK CARRIER