Feed Silo Trailer

Width

max. 2,550 mm

Height

max. 3,950 mm

Geometric Volume

22 - 35 m³

Conveying Hopper

2 ~ 4

Category

8

Products to be Carried

Bulk grained cereals and powdered foodstuffs such as poultry feed, pelleted feed, bran, maize, barley, wheat, feed, etc.

Operating Temperature

-20 ˚C / +50 ˚C

Certification

Machinery Safety Directive (2006/42/EC)

• Varies according to the selected product type and optional equipment.

Shell

• Elliptical cross-section design in high-strength, imported, special-alloy ST52 material.
• In the silo tanker manufacturing industry, a special shell structure; a unique shell structure that is safe, smooth and of even surface, obtained from seamless circular single-piece plates joining at the lower centre of the shell inside the chassis, with their welded joints carried out by certified welders using a special welding method.
• It holds the ISO 3834 Welded Manufacturing Quality Qualification Approval.
• Thanks to uninterrupted, high-performance robotic welding technology, stress on the shell and welding defects arising from the human factor are minimised; the shell is thereby made safe against impacts and shocks.
• The W-angled shell design, which prevents material from remaining inside, offers rapid discharge with a single (optionally double) auger system.

Loading / Discharge Line

Loading Line

• Top loading; carried out via loading covers that open horizontally thanks to a rail system, hinged to the loading-cover throat formed as a single piece with the shell.

Discharge Line

• Two separate discharge systems, from the top or the bottom, depending on the position of the silo.
• Top discharge is carried out by transferring, from the discharge covers opened with manual assistance in each compartment, in sequence to the horizontal augers operating independently of one another, then to the vertical auger and the upper discharge pipe; when top discharge is disabled, bottom discharge is performed.

Electrical Components

• 120 x 60 sheet-metal panel (1 unit).
• Contactors connected to the motors.
• Motor protection thermal relays.
• 8-way control unit (with emergency stop).
• The electrical cables connected to these.
• Our products are compliant with TSE standards.
• ABB brand or Schneider brand equipment.

Hydraulic Components

• 350 l hydraulic motor for the rotating auger.
• 2 x 1 valve.
• 6 l HEMA pump.
• Oil filter.
• 2 HP 1400 rpm motor.
• 80 x 50 lift.
• Hydraulic pump unit; it transmits motion to the hydraulic motor to drive it and supplies the energy required for the left-right and up-down movement of the discharge pipe.

Control Panel and Hydraulic Control Unit

• Control panel prepared for controlling the augers, the connected motors and the hydraulic unit system.

Paint

• At least 2 coats of epoxy primer are applied during painting.
• The top-coat application is carried out with 2 coats of acrylic paint.

Note

BARLAS reserves the right to make changes to its products. The technical information consists of approximate data and is intended for the standard product application. Dimensions may vary depending on the make and model of the truck. The information shared above does not constitute an offer. For further detailed information about the product, the company should be contacted.

Width

max. 2,550 mm

Height

max. 3,950 mm

Geometric Volume

8 - 18 m³

Conveying Hopper

1 ~ 2

Category

8

Products to be Carried

Bulk grained cereals and powdered foodstuffs such as poultry feed, pelleted feed, bran, maize, barley, wheat, feed, etc.

Operating Temperature

-20 ˚C / +50 ˚C

Certification

Machinery Safety Directive (2006/42/EC)

• Varies according to the selected product type and optional equipment.

Shell

• Elliptical cross-section design in high-strength, imported, special-alloy ST52 material.
• In the silo tanker manufacturing industry, a special shell structure; a unique shell structure that is safe, smooth and of even surface, obtained from seamless circular single-piece plates joining at the lower centre of the shell inside the chassis, with their welded joints carried out by certified welders using a special welding method.
• It holds the ISO 3834 Welded Manufacturing Quality Qualification Approval.
• Thanks to uninterrupted, high-performance robotic welding technology, stress on the shell and welding defects arising from the human factor are minimised; the shell is thereby made safe against impacts and shocks.
• The W-angled shell design, which prevents material from remaining inside, offers rapid discharge with a single (optionally double) auger system.

Loading / Discharge Line

Loading Line

• Top loading; carried out via loading covers that open horizontally thanks to a rail system, hinged to the loading-cover throat formed as a single piece with the shell.

Discharge Line

• Two separate discharge systems, from the top or the bottom, depending on the position of the silo.
• Top discharge is carried out by transferring, from the discharge covers opened with manual assistance in each compartment, in sequence to the horizontal augers operating independently of one another, then to the vertical auger and the upper discharge pipe; when top discharge is disabled, bottom discharge is performed.

Electrical Components

• 120 x 60 sheet-metal panel (1 unit).
• Contactors connected to the motors.
• Motor protection thermal relays.
• 8-way control unit (with emergency stop).
• The electrical cables connected to these.
• Our products are compliant with TSE standards.
• ABB brand or Schneider brand equipment.

Hydraulic Components

• 350 l hydraulic motor for the rotating auger.
• 2 x 1 valve.
• 6 l HEMA pump.
• Oil filter.
• 2 HP 1400 rpm motor.
• 80 x 50 lift.
• Hydraulic pump unit; it transmits motion to the hydraulic motor to drive it and supplies the energy required for the left-right and up-down movement of the discharge pipe.

Control Panel and Hydraulic Control Unit

• Control panel prepared for controlling the augers, the connected motors and the hydraulic unit system.

Paint

• At least 2 coats of epoxy primer are applied during painting.
• The top-coat application is carried out with 2 coats of acrylic paint.

Note

BARLAS reserves the right to make changes to its products. The technical information consists of approximate data and is intended for the standard product application. Dimensions may vary depending on the make and model of the truck. The information shared above does not constitute an offer. For further detailed information about the product, the company should be contacted.