Tipper with Side/Tail Boards
Available in 4 model variants — with full technical sheets
Technical Specifications
Chassis
High-strength imported and ST52 grade sheet steel is used for the chassis main plate (web plate – longitudinal member), the upper and lower flanges and all cross members. The chassis is robot-welded in an I-section form.
- Body
- Wear- and impact-resistant, high-strength imported sheet steel is used in production.
- Lighting system
- 24 V lighting with 2x7+1x15 pin sockets.
- Brake system
- WABCO or KNORR-BREMSE 2S-2M EBS system with RSS.
Running gear
Domestically produced drum-brake axle set with air suspension, 70 single-leaf springs and 3x9 ton capacity.
6+1 tyres of the preferred brand, size 385x65xR22,5, with matching rims.
Paint
Grit metal shot blasting, epoxy primer and acrylic paint application (in an oven-cured paint booth).
Standard accessories
- 2-speed mechanical landing legs
- 1 tube-type spare wheel carrier
- 1 wheel chock and chock holder
- 2 storage cabinets
- 1 fire extinguisher cabinet on the vehicle
- 1 water tank
- 6 plastic full mudguards
- 1 tonnage gauge
Standard features
- Manual lift and brake cut-off for the 1st axle
Hydraulic system
- 5-stage telescopic cylinder
- Dual-speed valve
- Limit control valve
- Oil tank
- Hoses and fittings for the hydraulic installation
- Air installation with air-controlled switch inside the cab
Options
- Prevention of vehicle movement by automatic braking while the tipper body is raised
- European drum-brake and disc-brake axles
- PTO installation
- Aluminium rims
- Tarpaulin system
Chassis
High-strength imported and ST52-grade sheet is preferred for the manufacture of the chassis main plate (web plate – side member), the lower and upper flanges, and all cross-members. The chassis is produced by robot welding in an I cross-section form.
- Body
- Imported, high-strength sheets resistant to wear and impact are preferred in production.
- Lighting System
- 24 V lighting, with 2x7+1x15 pin sockets.
- Braking System
- WABCO or KNORR-BREMSE brand, RSS-featured 2S-2M EBS system.
Running Gear
Air-suspended, 70 single-leaf, 3x9 tonne capacity drum-braked domestic axle set.
6+1 tyres in 385x65xR22.5 size in the brand selected by Barlas, and rims compatible with these tyres.
Paint
Grit metal shot-blasting, epoxy primer and acrylic paint application (in a stove-enamel paint booth).
Standard Accessories
- 2-speed mechanical parking legs
- 1 tubular spare-wheel holder
- 1 wheel-chock holder and chock
- 2 lockers
- The vehicle has 1 fire-extinguisher cabinet
- 1 water tank
- 6 plastic full mudguards
- 1 load (tonnage) gauge
Standard Features
- Manual lift and brake cut-off for the 1st axle
Hydraulic System
- Telescopic-type 5-stage cylinder
- Two-speed stage valve
- Limit control valve
- Oil tank
- Hoses and fittings of the hydraulic installation
- Air installation with an air-controlled button inside the cab
Options
- Prevention of vehicle movement thanks to automatic braking while the tipper body is in the open position
- European drum and disc axles
- PTO installation
- Aluminium rim
- Tarpaulin system
Chassis
High-strength imported and ST52-grade sheet is preferred for the manufacture of the chassis main plate (web plate – side member), the lower and upper flanges, and all cross-members. The chassis is produced by robot welding in an I cross-section form.
- Body
- Imported, high-strength sheets resistant to wear and impact are preferred in production.
- Lighting System
- 24 V lighting, with 2x7+1x15 pin sockets.
- Braking System
- WABCO or KNORR-BREMSE brand, RSS-featured 2S-2M EBS system.
Running Gear
Air-suspended, 70 single-leaf, 3x9 tonne capacity drum-braked domestic axle set.
6+1 tyres in 385x65xR22.5 size in the brand selected by Barlas, and rims compatible with these tyres.
Paint
Grit metal shot-blasting, epoxy primer and acrylic paint application (in a stove-enamel paint booth).
Standard Accessories
- 2-speed mechanical parking legs
- 1 tubular spare-wheel holder
- 1 wheel-chock holder and chock
- 2 lockers
- The vehicle has 1 fire-extinguisher cabinet
- 1 water tank
- 6 plastic full mudguards
- 1 load (tonnage) gauge
Standard Features
- Manual lift and brake cut-off for the 1st axle
Hydraulic System
- Telescopic-type 5-stage cylinder
- Two-speed stage valve
- Limit control valve
- Oil tank
- Hoses and fittings of the hydraulic installation
- Air installation with an air-controlled button inside the cab
Options
- Prevention of vehicle movement thanks to automatic braking while the tipper body is in the open position
- European drum and disc axles
- PTO installation
- Aluminium rim
- Tarpaulin system
- Body
- Imported, high-strength sheets resistant to wear and impact are preferred in production.
- Paint
- Grit metal shot-blasting, epoxy primer and acrylic paint application (in a stove-enamel paint booth).
Standard Features
- 90 cm side wall
- 35 + 35 add-on
Options
- 3rd add-on