Water Tanker

Width

max. 2.550 mm.

Height

max 3.800 mm *

Axle spacing

1.300 ~ 1.400 mm *

King-pin height

1.250 ~ 1.350 mm *

Tare weight

7.250 ~ 8.800 kg *

Geometric volume

26.000 ~ 36.000 l *

Number of compartments

1 ~ 3 *

Tank

Construction material series

Stainless and carbon steel *

Products carried

Drinking and utility water *

Operating temperature

-20 ˚C +50 ˚C

• Varies according to the selected product type and optional equipment.

Tank shell

Cylindrical cross-section, designed in compliance with the EN 14025 design standard,

One external dished end at the front and one at the rear, with internal dished ends / surge baffles to the EN 14025 design standard according to the selected number of compartments,

ISO 3834 welded fabrication quality approval is held,

A unique tank shell in the tanker manufacturing sector

the cylindrical shell is built from transversally seamless one-piece plates joined using the longest-weld-seam technology, with the minimum number of junction (T) points and a safe, smooth and even surface,

Continuous, high-performance robotic welding technology minimises stress effects on the shell and welding defects caused by the human factor, making the shell safe against impacts and collisions,

To increase shell strength and reduce stress, robotic welding is applied to the OMEGA® monoblock mounting saddles at the chassis joints, ensuring the saddles grip the shell as a single piece,

Special design ensuring complete discharge by preventing liquid remaining in any tank compartment,

A cleaning manhole for cleaning the tank interior and, where required, each compartment,

Air-gap (ullage) safety compliant with EN 15120 against expansion and overflow.

Filling / discharge line

Filling line

Bottom filling via couplings on the right-hand side in the direction of travel or at the rear; top filling through the manhole covers or via closed-circuit filling couplings,

Discharge line

Free gravity discharge through EN 13094-compliant discharge piping located on the right-hand side in the direction of travel, running from the footvalves to the couplings with a slope that leaves no liquid in the line after discharge,

Discharge pipes welded to imported patented elbows, holding ISO 3834 welded fabrication quality approval.

Chassis

Special-design monoblock chassis, angled on the horizontal and vertical axes, matched to the shell design and providing anti-rollover safety,

OMEGA® monoblock mounting saddles fit the chassis mounting seats perfectly, forming a rigid structure and increasing strength,

Stress-relief openings in the structure distribute the forces transferred from road conditions to the running gear, reducing stress,

The chassis structural components are fabricated in perfect alignment by certified welders using synergic welding machines under ISO 3834 welded fabrication quality approval.

Chassis equipment

King-pin

Component type-approved to ECE R 55, 2” or 3.5”, removable and refittable from below

Landing legs

Two-speed trailer landing legs, each rated for 25 ton dynamic and 50 ton static load

Axles

Axle set with air suspension and disc brakes, each rated at 9 or 10 ton

Rims

14,00 or 11,75 x 22,5

Tyres

425 or 385 /65 R 22,5

Brake system

2S2M EBS brake system with RSP, compliant with ECE R 13

Electrical system

ADR electrical set compliant with ECE R 105

Bumper

Compliant with ECE R 58

Paint

Passivation carried out after pickling inside the tank prevents bacterial growth and chemical corrosion,

The tank exterior is painted with at least 2 coats of epoxy primer,

The finish is an oven-cured paint process with 2 coats of acrylic paint,

Advanced technical equipment provides a homogeneous distribution over every point of the shell and a varnish-gloss surface finish.

BARLAS reserves the right to make changes to its products. The technical data given are approximate values based on the standard product configuration. Dimensions may vary depending on the truck make and model. The information above does not constitute an offer. Please contact us for further product details.

SILO TRAILER